NEW: Strucsol EASF+ Resin 300ml

Introducing our BRAND NEW, newly formulated high quality resin: EASF+.

A drop in replacement for our current EASF resin, you get the following new benefits: 

•          Higher bond strength than polyester or Epoxy Acrylate resins
•          Contains no Styrene, reducing the use of noxious smelling setting agents within the product, meaning it can be used both indoors and outdoors
• High bond strength even on wet substrates   
• WRAS approval   
• Fire Rated
• Suitable for anchor bonding in all masonry substrates
• Rapid setting
• Easy dispensing due to improved formulation and nozzle design.

Also includes TWO nozzles per tube instead of the one per tube may get with others, meaning you can reuse the resin again on another job providing you keep the 1st nozzle on (with the resin set) or cap the resin when taking off. 

With new colour changing technology, our EASF+ resin will now change colour once it has set- so you are now better able to tell which parts of your resin dried or not. Blue indicates wet resin, and light gray is dry and set resin. 

Setting time 5/15 Mins dependent on the ambient temperature, setting quicker in warmer temperatures (see cure data on labels)

Tips

• For cold environment use: warm the resin in a tub of warm water for 15mins to allow the resin to flow easier out of the nozzles.
• Resin tube fits standard 380mm/400ml Resin guns .
• For high volume use consider our Auto Resin gun, making effortless controlled application of resin.

Applications

• Bonding of all metal anchors to Brick, Stone and Concrete
• Bonding of helical wire into bed joints and stone. 
• Security anchors 
• Scaffold Anchors 
• Resin Bonded wall ties 
• Crack stitching Masonry 
• Beam and Lintel Installation 
• Cavity Wall Ties 

Setting time: Initial cure 5 mins /15 mins. 

In the video attached here, the resin is being applied with our 300ml Auto Resin Gun (power tool adapter)